top of page

TIG 

tig kolarc skopje welder.png

T 200 DC PULSE

  • TIG 200 DC Pulse inverter welding machine.

  • Specially designed for pipe welding in oil, natural gas, chemical and water lines.

  • All parameter controls can be accessed from the front panel, the compact design and dimensions ensure easy transport to the welder and ergonomic use.

  • Thanks to the Pulse feature, an easily controllable welding bath, stable arc formation and better penetration are achieved.

  • Thanks to the integrated timer, the front gas, end gas and soft start times can be adjusted at the arc start and ends and the Tungsten electrode is protected especially after welding.

  • With UPSLOPE and DOWNSLOPE, the current-time curve can be set at arc start and end and crater formation is prevented at the welding end.

  • It provides the possibility to make the electrode (MMA) and TIG welding with a single machine.

  • The LIFT-TIG function

  • With HF TIG high frequency ignition feature, arc starting is provided without tungsten contact to material.

  • With the 2T-4T function, it offers the possibility of welding without pressing the trigger continuously.

  • Fully compatible with electric generators.

  • Mains Voltage (VAC) 230 ± %10

  • Ampere Range (A) 10-200

  • Duty Cycle (40oC)

    • %35 : 200 A, 18 V

    • %60 : 110 A, 14.4 V

    • %100 : 90 A, 13.6 V

  • Maximum Input Power (kVA) 7.1 kVA

  • Open Circuit Voltage (VDC) 96

  • Dimensions (HxWxL, mm) 289 x 147 x 381

  • Net Weight (kg) 7 kg

  • Standard Accessories

    • 3m Mains Cable (4 x 2.5 mm2)

    • 3m Ground Cable (16 mm2)

    • Gas Regulator

    • 4m 200A Torch

  • Stock Code M0028

bottom of page